Showing 1–20 of 83 results

Show sidebar
Show 20 50 100 All
Clear filters

3P 75 Plate, Red PU Caster

Available on backorder

­ ­ ­
75 93.5 60
34.000 ₫ – 46.000 ₫
The steel bracket is slightly thicker than same tier casters in light duty rank. There are 2 small ball bearings in the center of the wheel so it can roll smoothly. The caster also has 2 steel hubs to prevent dust, fiber and water intrusion.
Select options

Feida 75 Plate, Twin wheel Medical Caster

In stock

­ ­ ­
75 86 50
74.000 ₫
ABS plastic frame is durable against external forces. Also wear and tear, water and detergents. The wheel has a unique locking system that is very beautiful and the operating force is significantly lighter than similar products. Rubber treads are soft, ride smoothly, non-marking and make less noise.
Select options

Feida 75 Plate, Affordable Magenta PU Caster

In stock

­ ­ ­
75 105 75
26.000 ₫ – 41.000 ₫
We order the product according to the criteria of being an affordable caster. We've to check quire a collection of manufacturers to ensure the quality is kept at an acceptable level:
  • No logo option to cut cost.
  • Mostly pure molded PU plastic. The wheel surface only have hardly visible scratches. Wear and tear resistant.
  • Pre-lubricated bearing with shield. Anti-winding covers on both sides.
  • Dust ring protection for Swivel head.
  • The 6-hole pre-drilled plate is better suited to different installation conditions.
Select options

GCT 75 Plate, Light duty Solid rubber Caster

Available on backorder

­ ­ ­
75 93 50
24.000 ₫ – 42.000 ₫
Superior than most of small China caster, this one is better both in steel bracket and wheel quality. As you can see GCT Light duty caster is definitely has higher load capacity and last longer. In GCT product range, the plastic casters are prefer over rubber casters.
Select options

China 75 Plate, Affordable Solid Rubber Caster

In stock

­ ­ ­
75 93 30
27.000 ₫ – 31.000 ₫
Just acceptable quality: steel bracket is thin and average wheel quality. The caster is not too durable as it has only one ball bearing raceway in swivel head so if overload or by foreign force the bearing ball may fall out.
Select options

Feida 75 Plate, Gray TPR caster

In stock

­ ­ ­
75 107 75
31.000 ₫ – 46.000 ₫
Quite a bargain. Grey TPR wheel is better than the usual Magenta PVC Caster. It is cushion, tear and wear resistant. With ball bearings and hubs, it creates no noise, requires less labor when operating. The dust proof ring and plastic cover clear the fear of fiber, hair will stuck the wheel. Most suitable on wood tile floor.
Select options

PT 75 Plate, Solid rubber Caster

In stock

­ ­ ­
75 97 50
32.000 ₫ – 50.000 ₫
Superior than most of small China caster, nearly archive the same level with Japan ones. Sturdy rubber that is hard to break, hard to wear out by daily use. This is one of the most success product line of Phong Thanh.
Select options

Feida 100 Plate, Affordable Magenta PU Caster

In stock

­ ­ ­
100 131 90
33.000 ₫ – 48.000 ₫
We order the product according to the criteria of being an affordable caster. We've to check quire a collection of manufacturers to ensure the quality is kept at an acceptable level:
  • No logo option to cut cost.
  • Mostly pure molded PU plastic. The wheel surface only have hardly visible scratches. Wear and tear resistant.
  • Pre-lubricated bearing with shield. Anti-winding covers on both sides.
  • Dust ring protection for Swivel head.
  • The 6-hole pre-drilled plate is better suited to different installation conditions.
Select options

GCT 100 Plate, Slim rubber Caster

Available on backorder

­ ­ ­
100 122 40
35.000 ₫ – 55.000 ₫
Superior than most of small China caster, this one is better both in steel bracket and wheel quality. As you can see GCT Light duty caster is definitely has higher load capacity and last longer. In GCT product range, the plastic casters are prefer over rubber casters.
Select options

Pacific 75 Plate, TPU Caster

In stock

­ ­ ­
75 99 40
40.000 ₫
Light duty casters for institutional. The caster is well made & using high quality material. It can bear up to 25 kgs per caster. Designed for using in the living room, kitchen, office. Preffered for carts with are not often move.
Select options

Pacific 75 Modular stem, TPU Caster

Out of stock

­ ­ ­
75 99 40
40.000 ₫
Light duty casters for institutional. The caster is well made & using high quality material. It can bear up to 25 kgs per caster. Designed for using in the living room, kitchen, office. Preffered for carts with are not often move.
Select options

Feida 100 Plate, Gray TPR caster

In stock

­ ­ ­
100 131 90
40.000 ₫ – 55.000 ₫
Quite a bargain. Grey TPR wheel is better than the usual Magenta PVC Caster. It is cushion, tear and wear resistant. With ball bearings and hubs, it creates no noise, requires less labor when operating. The dust proof ring and plastic cover clear the fear of fiber, hair will stuck the wheel. Most suitable on wood tile floor.
Select options

PT 75 Threaded stem, Solid rubber Caster

In stock

­ ­ ­
75 100 50
46.000 ₫ – 52.000 ₫
Superior than most of small China caster, nearly archive the same level with Japan ones. Sturdy rubber that is hard to break, hard to wear out by daily use. This is one of the most success product line of Phong Thanh.
Select options

PT 100x28 Plate, Solid rubber Caster

Available on backorder

­ ­ ­
100 122 50
43.000 ₫ – 69.000 ₫
Superior than most of small China caster, nearly archive the same level with Japan ones. Sturdy rubber that is hard to break, hard to wear out by daily use. This is one of the most success product line of Phong Thanh.
Select options

GCT 75 Threaded stem, Solid Rubber Caster

Available on backorder

­ ­ ­
75 93 50
39.000 ₫ – 45.000 ₫
Superior than most of small China caster, this one is better both in steel bracket and wheel quality. As you can see GCT Light duty caster is definitely has higher load capacity and last longer. In GCT product range, the plastic casters are prefer over rubber casters.
Select options

GCT 75 Plate, Red TPU Caster

In stock

­ ­ ­
75 93 60
39.000 ₫ – 54.000 ₫
Double ball bearings help the caster rolls very smoothly. Overall quality is much better than those cheap China casters. This TPU wheel can help reducing noise when operating.
Select options

Bánh xe Feida 100 Cao su béo, mặt đế

In stock

­ ­ ­
100 131 95
45.000 ₫ – 62.000 ₫
Ưu điểm lớn nhất của sản phẩm là giá thành rẻ. Là mặt hàng chọn của Hào Phong nên dù là dòng giá rẻ nhưng sản phẩm vẫn có sự chau chuốt nhất định. Thiết kế vô cùng bắt mắt và sang trọng với cốt nhựa PP màu hoàng kim giả kim loại. Phần lốp tiếp xúc mặt nền là chất Cao su mềm TPR màu xám - đảm bảo đi êm, không ồn và không bị lăn vết. Bánh xe có lắp 2 ổ bi vòng đảm bảo dễ lăn.
Select options

Pacific 100 Plate, TPU Caster

In stock

­ ­ ­
100 124 40
46.000 ₫
Light duty casters for institutional. The caster is well made & using high quality material. It can bear up to 25 kgs per caster. Designed for using in the living room, kitchen, office. Proffered for carts with are not often move.
Select options
Placeholder

Bánh xe cao su loại nhỏ SUPO 75, mặt đế

Available on backorder

­ ­ ­
75 93 45
47.000 ₫ – 73.000 ₫
Compact, small but still have a lot of options. This caster has chrome plating, dust-proof ring, double ball raceway and even brake. The rubber wheel is soft, noiseless yet very durable. A high-end product Light duty caster indeed (!)
Select options

Pacific 100 Modular stem, TPU Caster

Out of stock

­ ­ ­
100 124 40
52.000 ₫
Light duty casters for institutional. The caster is well made & using high quality material. It can bear up to 25 kgs per caster. Designed for using in the living room, kitchen, office. Proffered for carts with are not often move.
Select options