☆ Bánh xe đẩy hàng – Page 4 – Bánh Xe đẩy hàng Hà Nội

3P 75 Plate, Red PU Caster

Available on backorder


75	93.5	60

34.000 ₫ – 46.000 ₫

The steel bracket is slightly thicker than same tier casters in light duty rank. There are 2 small ball bearings in the center of the wheel so it can roll smoothly. The caster also has 2 steel hubs to prevent dust, fiber and water intrusion.

Select options

China 50 Plate, Affordable Rubber Caster

In stock


50	65	20

11.000 ₫ – 13.500 ₫

Just acceptable quality: steel bracket is thin a little low load capacity. The caster is not too durable as it has only one ball bearing raceway in swivel head so if overload or by foreign force the bearing ball may fall out.

Select options

China 40 Plate, Affordable Rubber Caster

In stock


40	51	12

12.000 ₫ – 15.000 ₫

Just acceptable quality: steel bracket is thin and average wheel quality. The caster is not too durable as it has only one ball bearing raceway in swivel head so if overload or by foreign force the bearing ball may fall out.

Select options

SUPO 25 Plate, Light duty Brown TPR Caster

In stock


25	35-36.5	6

12.000 ₫ – 17.000 ₫

Compact, small but still have a lot of options. This caster has chrome plating, dust-proof ring, double ball raceway and even brake. The rubber wheel is soft, noiseless yet very durable. A high-end product Light duty caster indeed (!)

Select options

SUPO 32 Plate, Light duty Brown TPR Caster

In stock


32	43-44	12

15.000 ₫ – 20.000 ₫

Compact, small but still have a lot of options. This caster has chrome plating, dust-proof ring, double ball raceway and even brake. The rubber wheel is soft, noiseless yet very durable. A high-end product Light duty caster indeed (!)

Select options

Feida 75 Plate, Twin wheel Medical Caster

In stock


75	86	50

74.000 ₫

ABS plastic frame is durable against external forces. Also wear and tear, water and detergents. The wheel has a unique locking system that is very beautiful and the operating force is significantly lighter than similar products. Rubber treads are soft, ride smoothly, non-marking and make less noise.

Select options

SUPO 38 Plate, Light duty Brown TPR Caster

In stock


38	50.5-51.5	18

17.000 ₫ – 25.000 ₫

Compact, small but still have a lot of options. This caster has chrome plating, dust-proof ring, double ball raceway and even brake. The rubber wheel is soft, noiseless yet very durable. A high-end product Light duty caster indeed (!)

Select options

GC 50 Plate, Light duty Solid rubber Caster

Available on backorder


50	65	40

16.000 ₫ – 28.000 ₫

Superior than most of small China caster, this one is better both in steel bracket and wheel quality. As you can see GCT Light duty caster is definitely has higher load capacity and last longer. In GCT product range, the plastic casters are prefer over rubber casters.

Select options

GLOBE 38 Plate, Magenta PU Caster

In stock


38	50	20

20.000 ₫

Double raceway bearing in swivel head. Cushion PU tread, shiny Zinc coating. Pretty much reasons to different her from other cheap China's cheap products.

Select options

GLOBE 38 Threaded stem, Magenta PU Caster

Available on backorder


38	55	20

20.000 ₫ – 24.000 ₫

Nổi trội hơn hẳn so với hàng Trung Quốc cấp thấp: Bánh xe có cổ bi xoay 2 tầng và các rãnh bi bằng thép tốt. Chất bánh PU có độ đàn hồi đi rất êm và nhẹ.

Select options

China 65 Plate, Affordable Rubber Caster

In stock


65	83	25

22.000 ₫ – 25.000 ₫

Just acceptable quality: steel bracket is thin a little low load capacity. The caster is not too durable as it has only one ball bearing raceway in swivel head so if overload or by foreign force the bearing ball may fall out.

Select options

PT 50 Plate, Light duty Solid rubber Caster

In stock


50	64	40

22.000 ₫ – 37.000 ₫

Superior than most of small China caster, nearly archive the same level with Japan ones. Sturdy rubber that is hard to break, hard to wear out by daily use. This is one of the most success product line of Phong Thanh.

Select options

GC 65 Plate, Light duty Solid rubber Caster

Available on backorder


65	82	50

23.000 ₫ – 38.000 ₫

Superior than most of small China caster, this one is better both in steel bracket and wheel quality. As you can see GCT Light duty caster is definitely has higher load capacity and last longer. In GCT product range, the plastic casters are prefer over rubber casters.

Select options

GCT 50 Plate, Light duty Red TPU Caster

In stock


50	65	40

22.000 ₫ – 31.000 ₫

Double ball bearings help the caster rolls very smoothly. Overall quality is much better than those cheap China casters. This TPU wheel can help reducing noise when operating.

Select options

SUPO 38 Plate, TPR Caster

In stock


38	52	20

23.000 ₫ – 32.000 ₫

A Compact and elegant caster. The wheel is slim, round and with precision bearing so it will roll at ease. Plastic bearing hubs help prevent dust, thread and water to intrude and help improve life time of the caster

Select options

GCT 75 Plate, Light duty Solid rubber Caster

Available on backorder


75	93	50

24.000 ₫ – 42.000 ₫

Superior than most of small China caster, this one is better both in steel bracket and wheel quality. As you can see GCT Light duty caster is definitely has higher load capacity and last longer. In GCT product range, the plastic casters are prefer over rubber casters.

Select options

Feida 75 Plate, Affordable Magenta PU Caster

In stock


75	105	75

26.000 ₫ – 41.000 ₫

We order the product according to the criteria of being an affordable caster. We've to check quire a collection of manufacturers to ensure the quality is kept at an acceptable level:

No logo option to cut cost.
Mostly pure molded PU plastic. The wheel surface only have hardly visible scratches. Wear and tear resistant.
Pre-lubricated bearing with shield. Anti-winding covers on both sides.
Dust ring protection for Swivel head.
The 6-hole pre-drilled plate is better suited to different installation conditions.

Select options

SUPO 50 Plate, Light duty Brown TPR Caster

In stock


50	65	25

27.000 ₫ – 41.000 ₫

Compact, small but still have a lot of options. This caster has chrome plating, dust-proof ring, double ball raceway and even brake. The rubber wheel is soft, noiseless yet very durable. A high-end product Light duty caster indeed (!)

Select options

GCT 50 Threaded stem, Light duty Rubber Caster (M10)

Available on backorder


50	67	40

25.000 ₫ – 30.000 ₫

Superior than most of small China caster, this one is better both in steel bracket and wheel quality. As you can see GCT Light duty caster is definitely has higher load capacity and last longer. In GCT product range, the plastic casters are prefer over rubber casters.

Select options

China 75 Plate, Affordable Solid Rubber Caster

In stock


75	93	30

27.000 ₫ – 31.000 ₫

Just acceptable quality: steel bracket is thin and average wheel quality. The caster is not too durable as it has only one ball bearing raceway in swivel head so if overload or by foreign force the bearing ball may fall out.

Select options

GCT 50 Threaded stem, Light duty Rubber Caster (M12)

Available on backorder


50	67	40

26.000 ₫ – 31.000 ₫

Superior than most of small China caster, this one is better both in steel bracket and wheel quality. As you can see GCT Light duty caster is definitely has higher load capacity and last longer. In GCT product range, the plastic casters are prefer over rubber casters.

Select options

GCT 50 Threaded stem, Light duty Red TPU Caster

Available on backorder


50	67	40

29.000 ₫ – 32.000 ₫

Double ball bearings help the caster rolls very smoothly. Overall quality is much better than those cheap China casters. This TPU wheel can help reducing noise when operating.

Select options

SUPO 38 Threaded stem, Brown TPR Caster

In stock


38	52	20

28.000 ₫ – 32.000 ₫

A Compact and elegant caster. The wheel is slim, round and with precision bearing so it will roll at ease. Plastic bearing hubs help prevent dust, thread and water to intrude and help improve life time of the caster

Select options

PT 65 Plate, Light duty Solid rubber Caster

In stock


65	84	50

28.000 ₫ – 47.000 ₫

Superior than most of small China caster, nearly archive the same level with Japan ones. Sturdy rubber that is hard to break, hard to wear out by daily use. This is one of the most success product line of Phong Thanh.

Select options

Feida 75 Plate, Gray TPR caster

In stock


75	107	75

31.000 ₫ – 46.000 ₫

Quite a bargain. Grey TPR wheel is better than the usual Magenta PVC Caster. It is cushion, tear and wear resistant. With ball bearings and hubs, it creates no noise, requires less labor when operating. The dust proof ring and plastic cover clear the fear of fiber, hair will stuck the wheel. Most suitable on wood tile floor.

Select options

PT 50 Threaded stem, Light duty Solid rubber Caster

In stock


50	69	40

37.000 ₫ – 40.000 ₫

Superior than most of small China caster, nearly archive the same level with Japan ones. Sturdy rubber that is hard to break, hard to wear out by daily use. This is one of the most success product line of Phong Thanh.

Select options

PT 75 Plate, Solid rubber Caster

In stock


75	97	50

32.000 ₫ – 50.000 ₫

Superior than most of small China caster, nearly archive the same level with Japan ones. Sturdy rubber that is hard to break, hard to wear out by daily use. This is one of the most success product line of Phong Thanh.

Select options

Feida 100 Plate, Affordable Magenta PU Caster

In stock


100	131	90

33.000 ₫ – 48.000 ₫

We order the product according to the criteria of being an affordable caster. We've to check quire a collection of manufacturers to ensure the quality is kept at an acceptable level:

No logo option to cut cost.
Mostly pure molded PU plastic. The wheel surface only have hardly visible scratches. Wear and tear resistant.
Pre-lubricated bearing with shield. Anti-winding covers on both sides.
Dust ring protection for Swivel head.
The 6-hole pre-drilled plate is better suited to different installation conditions.

Select options

GCT 100 Plate, Slim rubber Caster

Available on backorder


100	122	40

35.000 ₫ – 55.000 ₫

Superior than most of small China caster, this one is better both in steel bracket and wheel quality. As you can see GCT Light duty caster is definitely has higher load capacity and last longer. In GCT product range, the plastic casters are prefer over rubber casters.

Select options

GCT 50 Threaded stem, Light duty Red TPU Caster (M12)

In stock


50	67	40

31.000 ₫ – 35.000 ₫

Double ball bearings help the caster rolls very smoothly. Overall quality is much better than those cheap China casters. This TPU wheel can help reducing noise when operating.

Select options

GCT 65 Threaded stem, Light duty Rubber Caster

Available on backorder


65	83	50

34.000 ₫ – 41.000 ₫

Superior than most of small China caster, this one is better both in steel bracket and wheel quality. As you can see GCT Light duty caster is definitely has higher load capacity and last longer. In GCT product range, the plastic casters are prefer over rubber casters.

Select options

PT 65 Threaded stem, Solid rubber Caster

In stock


65	88	50

43.000 ₫ – 49.000 ₫

Superior than most of small China caster, nearly archive the same level with Japan ones. Sturdy rubber that is hard to break, hard to wear out by daily use. This is one of the most success product line of Phong Thanh.

Select options

Pacific 75 Plate, TPU Caster

In stock


75	99	40

40.000 ₫

Light duty casters for institutional. The caster is well made & using high quality material. It can bear up to 25 kgs per caster. Designed for using in the living room, kitchen, office. Preffered for carts with are not often move.

Select options

Pacific 75 Modular stem, TPU Caster

Out of stock


75	99	40

40.000 ₫

Light duty casters for institutional. The caster is well made & using high quality material. It can bear up to 25 kgs per caster. Designed for using in the living room, kitchen, office. Preffered for carts with are not often move.

Select options

Feida 100 Plate, Gray TPR caster

In stock


100	131	90

40.000 ₫ – 55.000 ₫

Quite a bargain. Grey TPR wheel is better than the usual Magenta PVC Caster. It is cushion, tear and wear resistant. With ball bearings and hubs, it creates no noise, requires less labor when operating. The dust proof ring and plastic cover clear the fear of fiber, hair will stuck the wheel. Most suitable on wood tile floor.

Select options

GCT 65 Plate, Light duty Red TPU Caster

In stock


65	82	50

36.000 ₫ – 46.000 ₫

Double ball bearings help the caster rolls very smoothly. Overall quality is much better than those cheap China casters. This TPU wheel can help reducing noise when operating.

Select options

PT 75 Threaded stem, Solid rubber Caster

In stock


75	100	50

46.000 ₫ – 52.000 ₫

Superior than most of small China caster, nearly archive the same level with Japan ones. Sturdy rubber that is hard to break, hard to wear out by daily use. This is one of the most success product line of Phong Thanh.

Select options

PT 100x28 Plate, Solid rubber Caster

Available on backorder


100	122	50

43.000 ₫ – 69.000 ₫

Superior than most of small China caster, nearly archive the same level with Japan ones. Sturdy rubber that is hard to break, hard to wear out by daily use. This is one of the most success product line of Phong Thanh.

Select options

GCT 75 Threaded stem, Solid Rubber Caster

Available on backorder


75	93	50

39.000 ₫ – 45.000 ₫

Superior than most of small China caster, this one is better both in steel bracket and wheel quality. As you can see GCT Light duty caster is definitely has higher load capacity and last longer. In GCT product range, the plastic casters are prefer over rubber casters.

Select options

GCT 75 Plate, Red TPU Caster

In stock


75	93	60

39.000 ₫ – 54.000 ₫

Double ball bearings help the caster rolls very smoothly. Overall quality is much better than those cheap China casters. This TPU wheel can help reducing noise when operating.

Select options

Bánh xe Feida 100 Cao su béo, mặt đế

In stock


100	131	95

45.000 ₫ – 62.000 ₫

Ưu điểm lớn nhất của sản phẩm là giá thành rẻ. Là mặt hàng chọn của Hào Phong nên dù là dòng giá rẻ nhưng sản phẩm vẫn có sự chau chuốt nhất định. Thiết kế vô cùng bắt mắt và sang trọng với cốt nhựa PP màu hoàng kim giả kim loại. Phần lốp tiếp xúc mặt nền là chất Cao su mềm TPR màu xám - đảm bảo đi êm, không ồn và không bị lăn vết. Bánh xe có lắp 2 ổ bi vòng đảm bảo dễ lăn.

Select options

Pacific 100 Plate, TPU Caster

In stock


100	124	40

46.000 ₫

Light duty casters for institutional. The caster is well made & using high quality material. It can bear up to 25 kgs per caster. Designed for using in the living room, kitchen, office. Proffered for carts with are not often move.

Select options

Bánh xe cao su loại nhỏ SUPO 75, mặt đế

Available on backorder


75	93	45

47.000 ₫ – 73.000 ₫

Compact, small but still have a lot of options. This caster has chrome plating, dust-proof ring, double ball raceway and even brake. The rubber wheel is soft, noiseless yet very durable. A high-end product Light duty caster indeed (!)

Select options

SUPO 50 Plate, Ball bearing Brown TPR Caster

In stock


50	77	25

46.000 ₫ – 78.000 ₫

A Compact and elegant caster. The wheel is slim, round and with precision bearing so it will roll at ease. Plastic bearing hubs help prevent dust, thread and water to intrude and help improve life time of the caster

Select options

GCT 65 Threaded stem, Light duty Red TPU Caster

In stock


65	83	50

44.000 ₫ – 49.000 ₫

Double ball bearings help the caster rolls very smoothly. Overall quality is much better than those cheap China casters. This TPU wheel can help reducing noise when operating.

Select options

Pacific 100 Modular stem, TPU Caster

Out of stock


100	124	40

52.000 ₫

Light duty casters for institutional. The caster is well made & using high quality material. It can bear up to 25 kgs per caster. Designed for using in the living room, kitchen, office. Proffered for carts with are not often move.

Select options

Affordable PL 100 Plate, Rubber Caster

In stock


98	133	65

45.000 ₫ – 70.000 ₫

It is a affordable medium-sized caster of Thuan Duc Phat company. It can be said that the PL wheel is a new breakthrough in quality and price of Vietnamese casters. PL wheels can even compete well with Chinese goods right in the northern market.

Select options

GCT 75 Threaded stem, Red TPU Caster

In stock


75	93	60

51.000 ₫ – 56.000 ₫

Double ball bearings help the caster rolls very smoothly. Overall quality is much better than those cheap China casters. This TPU wheel can help reducing noise when operating.

Select options

Feida 125 Plate, Fat Gray TPR caster

In stock


125	157	110

56.000 ₫ – 70.000 ₫

Ưu điểm lớn nhất của sản phẩm là giá thành rẻ. Là mặt hàng chọn của Hào Phong nên dù là dòng giá rẻ nhưng sản phẩm vẫn có sự chau chuốt nhất định. Thiết kế vô cùng bắt mắt và sang trọng với cốt nhựa PP màu hoàng kim giả kim loại. Phần lốp tiếp xúc mặt nền là chất Cao su mềm TPR màu xám - đảm bảo đi êm, không ồn và không bị lăn vết. Bánh xe có lắp 2 ổ bi vòng đảm bảo dễ lăn.

Select options

GCT 100 Plate, Solid Rubber Caster

Available on backorder


100	122	60

56.000 ₫ – 80.000 ₫

Superior than most of small China caster, this one is better both in steel bracket and wheel quality. As you can see GCT Light duty caster is definitely has higher load capacity and last longer. In GCT product range, the plastic casters are prefer over rubber casters.

Select options

SUPO 50 Threaded stem, Ball bearing Brown TPR Caster

In stock


50	77	25

58.000 ₫ – 78.000 ₫

A Compact and elegant caster. The wheel is slim, round and with precision bearing so it will roll at ease. Plastic bearing hubs help prevent dust, thread and water to intrude and help improve life time of the caster

Select options

GCT 100 Threaded stem, Slim rubber Caster

In stock


100	122	40

52.000 ₫ – 56.000 ₫

Superior than most of small China caster, this one is better both in steel bracket and wheel quality. As you can see GCT Light duty caster is definitely has higher load capacity and last longer. In GCT product range, the plastic casters are prefer over rubber casters.

Select options

PL130 Plate, Affordable Rubber Caster

In stock


123	155	75

49.000 ₫ – 79.000 ₫

It is a affordable medium-sized caster of Thuan Duc Phat company. It can be said that the PL wheel is a new breakthrough in quality and price of Vietnamese casters. PL wheels can even compete well with Chinese goods right in the northern market.

Select options

3P HB100 Plate, Affordable Red TPU Caster

Available on backorder


100	131	75

60.000 ₫ – 86.000 ₫

Giá thành rất cạnh tranh (!) nhưng chất lượng cũng rất được. Bánh lốp TPU dày hơn kha khá so với hàng cùng loại, hơn nữa còn có thêm ốp che bi bằng thép ở 2 bên. Dùng đúng tải trọng và chạy mặt nền tốt thì tuổi thọ có thể đạt 2 - 3 năm.

Select options

PT 100x28 Threaded stem, Solid rubber Caster

In stock


100	126	50

66.000 ₫ – 72.000 ₫

Superior than most of small China caster, nearly archive the same level with Japan ones. Sturdy rubber that is hard to break, hard to wear out by daily use. This is one of the most success product line of Phong Thanh.

Select options

GCT Threaded stem, Solid rubber Caster

Available on backorder


100	122	60

74.000 ₫ – 82.000 ₫

Superior than most of small China caster, this one is better both in steel bracket and wheel quality. As you can see GCT Light duty caster is definitely has higher load capacity and last longer. In GCT product range, the plastic casters are prefer over rubber casters.

Select options

GCT 100 Plate, Ball bearing Solid Rubber Caster

Available on backorder


100	122	70

62.000 ₫ – 94.000 ₫

Affordable Series. The casters are designed for common & light duty usage. Being said as the most popular affordable caster currently. Make sure to follow using instruction can help extend the product life.

Select options

Feida 75 Screw, Twin wheel Caster

In stock


75	86	50

75.000 ₫

ABS plastic frame is durable against external forces. Also wear and tear, water and detergents. The wheel has a unique locking system that is very beautiful and the operating force is significantly lighter than similar products. Rubber treads are soft, ride smoothly, non-marking and make less noise.

Select options

3P 100 Plate, Steel core Rubber Caster

Available on backorder


100	135	75

92.000 ₫ – 125.000 ₫

Can be said as Hao Phong's customized casters. We use PH steel bracket with Phong Thanh's rubber wheel as they are both have same load capacity. Thus created a affordable Series with medium duty capable.

Select options

SUPO 100 Plate, Orange PU Caster

In stock


100	130	120

72.000 ₫ – 107.000 ₫

Newer designs that focus on enhanced durability & using experience. The casters is shining in its luxury orange color. This well made PU caster can be applied in many industrials and areas. Please be noted that with the Dust-proof ring and Upper ball race way the Caster can last longer but require less maintenance effort. A real rising rival (!)

Select options

GCT 100x32 Plate, Red PU Caster

In stock


100	127	70

79.000 ₫ – 113.000 ₫

Double ball bearings help the caster rolls very smoothly. Overall quality is much better than those cheap China casters. PU wheel can withstand oil, grease. The PU wheel is cushion so will make less noise on operation.

Select options

GCT 125 Plate, Ball bearing Solid Rubber Caster

Available on backorder


125	150	80

77.000 ₫ – 118.000 ₫

Affordable Series. The casters are designed for common & light duty usage. Being said as the most popular affordable caster currently. Make sure to follow using instruction can help extend the product life.

Select options

Globe 75 Plate, Grey PU Caster

In stock


75	107	80

86.000 ₫ – 121.000 ₫

Single precision bearing helps the wheel roll mute & smoothly. The caster can rotate at ease, thanks to it's double bearing raceways. Plastic bearing hubs help prevent dust and silk intrude inside the core - thus increase its lifetime.

Select options

SUPO 75 Threaded stem, Slim Brown TPR Caster

In stock


75	104	42

74.000 ₫ – 97.000 ₫

Best suitable for office, hospital and lab thanks to the compact and elegant design. Cushion TPR wheel provides noiseless and comfort experience. Less maintenance requirement with plastic hubs as dust and water are prevented.

Select options

GLOBE 75 Threaded stem, Slim Black PU Caster

Available on backorder


75	104	65

75.000 ₫ – 98.000 ₫

High quality PU material wheels, moderate load 65 - 75 kg / 01 wheel suitable for use in supermarkets.

Select options

PT R100 Plate, Steel core Rubber Caster

In stock


100	131	60

90.000 ₫ – 147.000 ₫

Despite the size of the caster (Ø100 - 200mm), R Series is rated as Light duty type - only 60 kgs per caster. Rubber tread is just light cushion but will help reduce noise and surface protection.

Select options

3P 130 Plate, Steel core Rubber Caster

Available on backorder


125	163	90

100.000 ₫ – 134.000 ₫

Can be said as Hao Phong's customized casters. We use PH steel bracket with Phong Thanh's rubber wheel as they are both have same load capacity. Thus created a affordable Series with medium duty capable.

Select options

SUPO 75 Plate, Brown TPR Caster

In stock


75	106	80

93.000 ₫ – 129.000 ₫

Newer designs that focus on enhanced durability & using experience. Please be noted that with the Dust-proof ring and Upper ball race way the Caster can last longer but require less maintenance effort. A real rising rival (!)

Select options

GCT 100 Threaded stem, Ball bearing Solid Rubber Caster

Available on backorder


100	122	70

83.000 ₫ – 99.000 ₫

Affordable Series. The casters are designed for common & light duty usage. Being said as the most popular affordable caster currently. Make sure to follow using instruction can help extend the product life.

Select options

SUPO 100 Threaded stem, Slim Brown TPR Caster

Available on backorder


100	129	50

98.000 ₫ – 127.000 ₫

Sử dụng tốt cho nhu cầu văn phòng, bệnh viện hoặc phòng nghiên cứu với thiết kế gọn và sang trọng. Bánh xe cao su mềm không ồn, không lăn vết và rất dễ lăn do có lắp bi vòng có độ chính xác cao. Có ốp che nhựa cho ổ bi chống bụi & nước.

Select options

SUPO 75 Threaded stem, Medical Twin wheel PU Caster

Available on backorder


75	94	60

101.000 ₫ – 115.000 ₫

Có khung bằng nhựa ABS rất bền bỉ với ngoại lực, hao mòn, nước và các chất tẩy rửa. Bánh xe có hệ thống khóa độc nhất rất đẹp mắt mà thao tác lực lại nhẹ hơn đáng kể so với các sản phẩm tương tự. Lốp PU đi êm, mịn và không gây ồn.

Select options

SUPO 75 Threaded stem, Brown TPR Caster

In stock


75	108.5	80

105.000 ₫ – 129.000 ₫

Medium duty TPR caster is said to be durable, non-marking and very cushion. Double ball raceway in swivel head. Central Precision ball bearing in wheel with dust caps. Octagonal plate for easy installation.

Select options

GLOBE 75 Threaded stem, Grey PU Caster

In stock


75	109	80

97.000 ₫ – 121.000 ₫

Wheel surface hardness is Shore A: 95±2 so the wheel can help reduce noise when operating. Plastic hubs helps reduce dust, water, silk goes into its Single precision bearing. Thus longer caster's lifetime with less maintenance.

Select options

GCT G80 Plate,. Steel core PU

In stock


80	107	75

93.000 ₫ – 131.000 ₫

The caster is rated as light duty because of light duty style of steel bracket. However with Steel core PU wheel, the caster can roll quietly and easily thanks to double ball bearings.

Select options

GCT 125x32 Plate, Red PU Caster

In stock


125	152	80

98.000 ₫ – 140.000 ₫

Double ball bearings help the caster rolls very smoothly. Overall quality is much better than those cheap China casters. PU wheel can withstand oil, grease. The PU wheel is cushion so will make less noise on operation.

Select options

SUPO 100 Plate, Brown TPR Caster

In stock


100	130	100

109.000 ₫ – 145.000 ₫

Newer designs that focus on enhanced durability & using experience. Please be noted that with the Dust-proof ring and Upper ball race way the Caster can last longer but require less maintenance effort. A real rising rival (!)

Select options

PT R130 Plate, Steel core Rubber Caster

In stock


130	163	60

105.000 ₫ – 178.000 ₫

Despite the size of the caster (Ø100 - 200mm), R Series is rated as Light duty type - only 60 kgs per caster. Rubber tread is just light cushion but will help reduce noise and surface protection.

Select options

GLOBE 75 Plate, Black Conductive Rubber Caster

In stock


75	107	80

114.000 ₫ – 149.000 ₫

Conductive rubber tread materials offer excellent electrical discharging throughout the tread and across the whole contact surface. The steel bracket is Zinc coating so the whole caster is electrical conductive. The caster will then producing a continuous and safe discharging to ensure the safety of electronic devices.

Select options

GCT 100x32 Threaded stem, Red PU Caster

In stock


100	122	70

101.000 ₫ – 118.000 ₫

Double ball bearings help the caster rolls very smoothly. Overall quality is much better than those cheap China casters. PU wheel can withstand oil, grease. The PU wheel is cushion so will make less noise on operation.

Select options

Feida 100 Screw, Twin wheel Caster

In stock


100	138	80

115.000 ₫

ABS plastic frame is durable against external forces. Also wear and tear, water and detergents. The wheel has a unique locking system that is very beautiful and the operating force is significantly lighter than similar products. Rubber treads are soft, ride smoothly, non-marking and make less noise.

Select options

Feida 100 Plate, Twin wheel Medical Caster

In stock


100	138	80

113.000 ₫

ABS plastic frame is durable against external forces. Also wear and tear, water and detergents. The wheel has a unique locking system that is very beautiful and the operating force is significantly lighter than similar products. Rubber treads are soft, ride smoothly, non-marking and make less noise.

Select options

Globe 100 Plate, Grey PU Caster

In stock


100	130	100

105.000 ₫ – 140.000 ₫

Cushion grey PU tread is non-marking material. This caster will leave any mark on your clean & shiny floor. The PU wheel is also resist to water, oil, grease and some light chemical.

Select options

GCT 125 Threaded stem, Ball bearing Solid Rubber Caster

Available on backorder


125	150	80

102.000 ₫ – 124.000 ₫

Affordable Series. The casters are designed for common & light duty usage. Being said as the most popular affordable caster currently. Make sure to follow using instruction can help extend the product life.

Select options

GCT C100 Plate, Solid Rubber Caster

Available on backorder


100	135	75

103.000 ₫ – 146.000 ₫

The advantages of the C Series is the sturdiness of the steel bracket: very thick, even on par with Heavy duty standard. The steel bracket is Niken coating so it is very resistant to scratch, rust and corrosion. However, the Solid rubber wheel's load capacity is somewhat held back the strength of the bracket.

Select options

PT H100 Steel core Rubber Caster

Available on backorder


100	137.5	80

117.000 ₫ – 172.000 ₫

Shiny Nickel coating enhances rust and corrosion resistant. Firm and sturdy steel bracket with good rubber wheel - can last for 1 - 3 years even continuously use. Replacement wheels are also always ready.

Select options

Globe 125 Plate, Grey PU Caster

In stock


125	154	110

119.000 ₫ – 154.000 ₫

Strong steel bracket (3.0 mm steel thickness) - thicker and more sturdier than other competitor's medium class ones. With Hi class PU tread can hold up to 110kg load capacity per 1pcs. Definitely best choice to use for institutions and light industry.

Select options

GLOBE 100 Threaded stem, Grey PU Caster

In stock


100	132	100

117.000 ₫ – 141.000 ₫

Popular M12 threaded stem. Single precise bearing with plastic hubs. Also with the non-marking flat grey PU and dual brake, the caster is suitable for institutions & hospital's furniture, handcart.

Select options

SUPO 100 Threaded stem, Brown TPR Caster

In stock


100	133	100

121.000 ₫ – 146.000 ₫

Medium duty TPR caster is said to be durable, non-marking and very cushion. Double ball raceway in swivel head. Central Precision ball bearing in wheel with dust caps. Octagonal plate for easy installation.

Select options

SUPO 125 Plate, Brown TPR Caster

In stock


125	155	110

128.000 ₫ – 166.000 ₫

Newer designs that focus on enhanced durability & using experience. Please be noted that with the Dust-proof ring and Upper ball race way the Caster can last longer but require less maintenance effort. A real rising rival (!)

Select options

GCT C130 Plate, Solid Rubber Cater

Available on backorder


130	160	85

118.000 ₫ – 154.000 ₫

The advantages of the C Series is the sturdiness of the steel bracket: very thick, even on par with Heavy duty standard. The steel bracket is Niken coating so it is very resistant to scratch, rust and corrosion. However, the Solid rubber wheel's load capacity is somewhat held back the strength of the bracket.

Select options

Bánh xe chống tĩnh điện Globe 75 Cao su xám, mặt đế

Available on backorder


75	107	80

131.000 ₫ – 165.000 ₫

Conductive rubber tread materials offer excellent electrical discharging throughout the tread and across the whole contact surface. The steel bracket is Zinc coating so the whole caster is electrical conductive. The caster will then producing a continuous and safe discharging to ensure the safety of electronic devices.

Select options

PT M100 Plate, Steel core Rubber Caster

Available on backorder


100	140	100

131.000 ₫ – 207.000 ₫

Carefully Zinc coating enhances rust and corrosion resistant. Apply the new Steel core Rubber wheel - the caster look quite strong but still elegant. The quality is assured as it is made by number one caster manufacturer of Viet Nam.

Select options

PT H130 Steel core Rubber Caster

Available on backorder


125	161	100

133.000 ₫ – 183.000 ₫

Shiny Nickel coating enhances rust and corrosion resistant. Firm and sturdy steel bracket with good rubber wheel - can last for 1 - 3 years even continuously use. Replacement wheels are also always ready.

Select options

GCT G100 Plate, Steel core Rubber Caster

Available on backorder


100	140	80

116.000 ₫ – 201.000 ₫

Double ball race ways reinforced by wear-resistant tempered steel. The steel bracket has a moderate thickness, relatively bright thanks to the Nickel plating. The caster load capacity is suitable for light and medium industries.

Select options

GLOBE 75 Threaded stem, Conductive Rubber Caster

In stock


75	109	80

126.000 ₫ – 149.000 ₫

Conductive rubber tread materials offer excellent electrical discharging throughout the tread and across the whole contact surface. The steel bracket is Zinc coating so the whole caster is electrical conductive. The caster will then producing a continuous and safe discharging to ensure the safety of electronic devices.

Select options

3P 150 Plate, Cast iron core Rubber Caster

In stock


143	178	115

127.000 ₫ – 172.000 ₫

Near heavy duty caster - 4 mm thickness steel. This one is packed with the affordable MK rubber wheel and thread guards. Thus created a affordable Series with medium duty capable. Quite sturdy for a very comparative price.

Select options

GLOBE 125 Threaded stem, Brown TPR Caster

In stock


125	157.5	110

139.000 ₫ – 167.000 ₫

Medium duty TPR caster is said to be durable, non-marking and very cushion. Double ball raceway in swivel head. Central Precision ball bearing in wheel with dust caps. Octagonal plate for easy installation.

Select options

GCT 125x32 Threaded stem, Red PU Caster

In stock


125	152	80

120.000 ₫ – 144.000 ₫

Double ball bearings help the caster rolls very smoothly. Overall quality is much better than those cheap China casters. PU wheel can withstand oil, grease. The PU wheel is cushion so will make less noise on operation.

Select options

GCT N100 Plate, Steel core Rubber Caster

In stock


100	144	80

126.000 ₫ – 185.000 ₫

The N Series is much like a New Series of design and quality. The N Series has Japanese dual brake style. Along with JP dual brake is a very cushion rubber: soft, wear & tear resistant.

Select options

Bánh xe chống tĩnh điện Globe 75 Cao su xám, cọc vít

Available on backorder


75	109	80

144.000 ₫ – 166.000 ₫

Conductive rubber tread materials offer excellent electrical discharging throughout the tread and across the whole contact surface. The steel bracket is Zinc coating so the whole caster is electrical conductive. The caster will then producing a continuous and safe discharging to ensure the safety of electronic devices.

Select options

PT M130 Plate, Steel core Rubber Caster

Available on backorder


130	170	100

143.000 ₫ – 226.000 ₫

Carefully Zinc coating enhances rust and corrosion resistant. Apply the new Steel core Rubber wheel - the caster look quite strong but still elegant. The quality is assured as it is made by number one caster manufacturer of Viet Nam.

Select options

GLOBE 125 Threaded stem, Grey PU Caster

In stock


125	156	110

131.000 ₫ – 154.000 ₫

Lốp PU màu xám êm, lắp bi vòng đơn chính xác có ốp che nhựa. Có tùy chọn khóa kép. Bánh lăn êm, chịu mòn, chịu nước, dầu mỡ và không lăn vết cho phép bánh xe sử dụng tốt trong các phòng thí nghiệm, bệnh viện, vv...

Select options

GLOBE 100 Plate, Conductive Rubber Caster

In stock


100	130	90

142.000 ₫ – 185.000 ₫

Harm of static electricity to humans: With a very large amount of charge on the surface of an object, creating an extremely strong magnetic field in the surrounding environment, in the long term, will affect human health, especially the system. nervous system, genitourinary system, circulatory system..

Select options

PT R150 Steel core Rubber Caster

In stock


150	192	75

147.000 ₫ – 237.000 ₫

Despite the size of the caster (Ø100 - 200mm), R Series is rated as Light duty type - only 60 kgs per caster. Rubber tread is just light cushion but will help reduce noise and surface protection.

Select options

SUPO 100x38 Plate, Brown TPR Caster

In stock


100	137	110

155.000 ₫ – 191.000 ₫

A real bargain for you: This one is strong and sturdy. Manganese raceway and Dust proof ring are not something you'll see everyday. This one will last very long at minimum maintenance effort. The wheel is soft and protected by 2 covers.

Select options

SUPO 100 Threaded stem, Medical Twin wheel PU Caster

Available on backorder


100	121	80

149.000 ₫ – 172.000 ₫

Features an ABS plastic frame that is very resistant to external forces, wear and tear, water and detergents. The caster has a unique locking system that is beautiful and the force handling is significantly lighter than similar products. PU wheel are smoothly and noise reduction.

Select options

GCT K100 Heavy duty, Cast iron core Rubber Caster

Available on backorder


100	145	100

145.000 ₫ – 233.000 ₫

The K Series casters has all the features of heavy duty type: double ball bearing raceway, Zinc coating, steel bracket thickness is 5.5 mm. So the casters can withstand heavy load and they will serve you for quite a long time.

Select options

PT L100 Plate, Cast iron core Caster

In stock


100	139	80

151.000 ₫ – 222.000 ₫

The bracket is 2.5mm thickness of pressed steel. Japanese Standard Series style , the caster outlook is very attractive with a very shiny Niken coating. Rubber wheel quality is good and very wear resistant.

Select options

3P PH150 Plate, Affordable Red PU Caster

In stock


147	185	125

143.000 ₫ – 191.000 ₫

Medium duty welded bracket Series. The PU wheel can withstand water, oil, grease. Has steel hubs.

Select options

GLOBE 100 Threaded stem, Conductive Rubber Caster

In stock


100	132	90

160.000 ₫ – 184.000 ₫

Harm of static electricity to humans: With a very large amount of charge on the surface of an object, creating an extremely strong magnetic field in the surrounding environment, in the long term, will affect human health, especially the system. nervous system, genitourinary system, circulatory system..

Select options

GCT 100x32 Plate, Steel core Yellow PU Caster

Available on backorder


100	140	100

154.000 ₫ – 245.000 ₫

Double ball race ways reinforced by wear-resistant tempered steel. The steel bracket has a moderate thickness, relatively bright thanks to the Nickel plating. The caster load capacity is suitable for light and medium industries.

Select options

GCT C150 Cast iron Core Rubber Caster

In stock


145	180	150

168.000 ₫ – 223.000 ₫

The advantages of the C Series is the sturdiness of the steel bracket: very thick, even on par with Heavy duty standard. The steel bracket is Niken coating so it is very resistant to scratch, rust and corrosion. However, the Solid rubber wheel's load capacity is somewhat held back the strength of the bracket.

Select options

GCT G130 Plate, Steel core Rubber Caster

Available on backorder


130	177	100

150.000 ₫ – 240.000 ₫

Double ball race ways reinforced by wear-resistant tempered steel. The steel bracket has a moderate thickness, relatively bright thanks to the Nickel plating. The caster load capacity is suitable for light and medium industries.

Select options

3P PH150 Plate, Cast iron core Rubber Caster

In stock


143	178	125

164.000 ₫ – 208.000 ₫

Near heavy duty caster - 4 mm thickness steel. This one is packed with Phong Thanh's rubber wheel as they both have same load capacity. Thus created a affordable Series with medium duty capable. Quite sturdy for a comparative price.

Select options

PT L100 Plate, Steel core PU Caster

In stock


100	139	125

175.000 ₫ – 266.000 ₫

Shiny Nickel coating enhances rust and corrosion resistant. Steel hubs are soldered with the cast-iron core so it is hard for dust, water and silk to intrude the ball bearing and shaft. Thus lessen the needs for maintainance.

Select options

GLOBE 100 Plate, Steel core Rubber Caster

In stock


100	140	100

172.000 ₫ – 260.000 ₫

Smooth swiveling by double bearing in the swivel head. Hi-quality rubber that is both cushion and wear resistant.

Select options

GCT K130 Plate, Cast iron core Rubber Caster

Available on backorder


130	165	125

156.000 ₫ – 253.000 ₫

The K Series casters has all the features of heavy duty type: double ball bearing raceway, Zinc coating, steel bracket thickness is 5.5 mm. So the casters can withstand heavy load and they will serve you for quite a long time.

Select options

3P PH200 Plate, Red PU Caster

Available on backorder


196	233	150

176.000 ₫ – 226.000 ₫

Medium duty welded bracket Series. The PU wheel can withstand water, oil, grease. Has steel hubs.

Select options

GLOBE 100 Heavy duty, Black PU Caster

In stock


100	145	250

178.000 ₫ – 314.000 ₫

Reliable caster for heavy duty needs. 6.0 mm of steel bracket thickness with double ball bearing raceway. Flat PU tread wheel creates less noise when operate.

Select options

3P 200 Plate, Cast iron core Caster

In stock


190	229	140

170.000 ₫ – 215.000 ₫

Near heavy duty caster - 4 mm thickness steel. This one is packed with the affordable MK rubber wheel and thread guards. Thus created a affordable Series with medium duty capable. Quite sturdy for a very comparative price.

Select options

GCT 100x32 Plate, Steel core Red PU Caster

In stock


100	140	100

156.000 ₫ – 246.000 ₫

Double ball race ways reinforced by wear-resistant tempered steel. The steel bracket has a moderate thickness, relatively bright thanks to the Nickel plating. The caster load capacity is suitable for light and medium industries.

Select options

GCT K100 Heavy duty, Red TPU Caster

Available on backorder


100	145	150

157.000 ₫ – 233.000 ₫

Bracket K Series is made of steel up to 5.5 mm thickness, very strong and galvanized (Zinc) to increase rust resistance for the bracket. PP-reinforced TPU tires, so moving will not make as much noise as hard PA and PP wheels.

Select options

SUPO 125 Threaded stem, Medical Brown TPR Caster

In stock


125	162	110

184.000 ₫ – 202.000 ₫

Chrome plating steel frame with ABS cover that anti shock and corrosion. With the cushion TPR wheel, 65Mn grade steel in the Swivel head. The wheel is firm, flexible and mute. As the result, this caster is most suitable for Medical bed.

Select options

3P PH250-4 Steel rim Rubber Caster

In stock


205	240	125

158.000 ₫ – 181.000 ₫

Can be said as Hao Phong's customized casters. We use PH steel bracket with Phong Thanh's rubber wheel as they are both have same load capacity. Thus created a affordable Series with medium duty capable.

Select options

GLOBE 100 Threaded stem, Anti static Grey Rubber Caster

Available on backorder


100	132	90

176.000 ₫ – 200.000 ₫

Harm of static electricity to humans: With a very large amount of charge on the surface of an object, creating an extremely strong magnetic field in the surrounding environment, in the long term, will affect human health, especially the system. nervous system, genitourinary system, circulatory system..

Select options

GLOBE 125 Plate, Conductive Rubber Caster

Available on backorder


125	154	100

195.000 ₫ – 234.000 ₫

Harms of static electricity in production: Films, bottles and jars are adhered to dust, products do not line up. Or cause sparks leading to fire and explosion. The ink is smudged (crow's feet, beard pulling...). The amount of waste increases due to static electricity causing position deviation when machining.

Select options

PT R200 Steel core Rubber Caster

Available on backorder


200	248	75

182.000 ₫ – 278.000 ₫

Despite the size of the caster (Ø100 - 200mm), R Series is rated as Light duty type - only 60 - 75 kgs per caster. Rubber tread is just light cushion but will help reduce noise and surface protection.

Select options

Globe 100 Threaded stem, Steel core Rubber

Available on backorder


100	145	100

196.000 ₫ – 260.000 ₫

Smooth swiveling by double bearing in the swivel head. Hi-quality rubber that is both cushion and wear resistant.

Select options

GLOBE 125 Plate, Hi-class PU Caster

Available on backorder


125	165	125

197.000 ₫ – 272.000 ₫

Smooth swiveling by double bearing in the swivel head. Hi-quality PU that is both cushion and wear resistant. Besides the caster can withstand water, oil, grease and light chemical.

Select options

GCT K130 Heavy duty, Red TPU Caster

Available on backorder


125	165	200

176.000 ₫ – 252.000 ₫

Bracket K Series is made of steel up to 5.5 mm thickness, very strong and galvanized (Zinc) to increase rust resistance for the bracket. PP-reinforced TPU tires, so moving will not make as much noise as hard PA and PP wheels.

Select options

GLOBE 100 Heavy duty, Cast iron core PU Caster

In stock


100	145	250

200.000 ₫ – 346.000 ₫

Heavy duty with good quality PU tread on firm cast-iron core. The caster is made to operate continuously, it also has greases nipples on bracket steel & wheel's cast-iron core. This makes easy maintenance.

Select options

SUPO 75 Plate, Plastic frame Brown TPR Caster

In stock


75	106	80

176.000 ₫ – 347.000 ₫

A rare water resistant caster, ideal for hospital, seafood industry and laboratory. The body frame is made of thick plastic with stainless steel moving parts. The TPR wheel with a precision bearing inside can roll smooth and noiseless.

Select options

SUPO 125x38 Plate, Brown TPR Caster

In stock


125	164	130

202.000 ₫ – 248.000 ₫

A real bargain for you: This one is strong and sturdy. Manganese raceway and Dust proof ring are not something you'll see everyday. This one will last very long at minimum maintenance effort. The wheel is soft and protected by 2 covers.

Select options

PT M150 Plate, Steel core Rubber Caster

Available on backorder


150	194	150

189.000 ₫ – 300.000 ₫

Carefully Zinc coating enhances rust and corrosion resistant. Apply the new Steel core Rubber wheel - the caster look quite strong but still elegant. The quality is assured as it is made by number one caster manufacturer of Viet Nam.

Select options

SUPO 125 Threaded stem, Medical Twin wheel Caster

Available on backorder


125	149	115

197.000 ₫ – 212.000 ₫

Features an ABS plastic frame that is very resistant to external forces, wear and tear, water and detergents. The caster has a unique locking system that is beautiful and the force handling is significantly lighter than similar products. PU wheel are smoothly and noise reduction.

Select options

Globe 125 Plate, Steel core Rubber Caster

In stock


125	165	125

206.000 ₫ – 280.000 ₫

Currently only Side brake available. Smooth swiveling by double bearing in the swivel head. Hi-quality rubber that is both cushion and wear resistant.

Select options

GCT G150 Plate, Steel core Rubber Caster

Available on backorder


150	198	125

182.000 ₫ – 270.000 ₫

Double ball race ways reinforced by wear-resistant tempered steel. The steel bracket has a moderate thickness, relatively bright thanks to the Nickel plating. The caster load capacity is suitable for light and medium industries.

Select options

GCT N130 Steel core Rubber Caster

In stock


130	178	125

183.000 ₫ – 262.000 ₫

The N Series is much like a New Series of design and quality. The N Series has Japanese dual brake style. Along with JP dual brake is a very cushion rubber: soft, wear & tear resistant.

Select options

Sisiku 100 Plate, Steel core PU Caster

Out of stock


100	144	130

154.000 ₫ – 293.000 ₫

The 2-stage ball bearing is made of heat-treated steel to increase friction and wear resistance. The heat treated swivel neck ensures a secure hold of the bearing balls in harsh situations. Has Z shape dual brake pedal - very light and easy to use.

Select options

GCT K150 Cast iron core Rubber Caster

Available on backorder


150	190	150

183.000 ₫ – 278.000 ₫

The K Series casters has all the features of heavy duty type: double ball bearing raceway, Zinc coating, steel bracket thickness is 5.5 mm. So the casters can withstand heavy load and they will serve you for quite a long time.

Select options

GLOBE 125 Threaded stem, Conductive Rubber Caster

Available on backorder


125	156	100

214.000 ₫ – 234.000 ₫

Harms of static electricity in production: Films, bottles and jars are adhered to dust, products do not line up. Or cause sparks leading to fire and explosion. The ink is smudged (crow's feet, beard pulling...). The amount of waste increases due to static electricity causing position deviation when machining.

Select options

3P PH200 Cast iron core Rubber Caster

In stock


190	229	150

212.000 ₫ – 256.000 ₫

Near heavy duty caster - 4 mm thickness steel. This one is packed with Phong Thanh's rubber wheel as they both have same load capacity. Thus created a affordable Series with medium duty capable. Quite sturdy for a comparative price.

Select options

SUPO 100 Plate, Plastic frame Brown TPR Caster

In stock


100	130	110

200.000 ₫ – 359.000 ₫

A rare water resistant caster, ideal for hospital, seafood industry and laboratory. The body frame is made of thick plastic with stainless steel moving parts. The TPR wheel with a precision bearing inside can roll smooth and noiseless.

Select options

SUPO 150 Plate, Brown TPR Caster

In stock


150	191	150

224.000 ₫ – 275.000 ₫

A real bargain for you: This one is strong and sturdy. Manganese raceway and Dust proof ring are not something you'll see everyday. This one will last very long at minimum maintenance effort. The wheel is soft and protected by 2 covers.

Select options

PT H150 Cast iron core Rubber Caster

Available on backorder


148	181	150

203.000 ₫ – 274.000 ₫

The H Series Caster is fitted with 6x2 Cast iron core Rubber wheels. Shiny Nickel plated steel fork, very thick and sturdy. When the wheel is worn out, you can contact us to buy a replacement wheel.

Select options

PT L130 Cast iron core Rubber Caster

In stock


130	179	100

206.000 ₫ – 292.000 ₫

The bracket is 2.5mm thickness of pressed steel. Japanese Standard Series style , the caster outlook is very attractive with a very shiny Niken coating. Rubber wheel quality is good and very wear resistant.

Select options

Bánh xe kéo M100 PU cốt gang

Available on backorder


100	140	125

204.000 ₫ – 277.000 ₫

Là mẫu bánh xe mới của Phong Thạnh. Càng hàn mạ Niken (Ni) để chống rỉ sét tốt hơn do khí hậu nóng ẩm của Việt Nam. Nhờ sử dụng bánh xe PU cốt thép, bánh xe có dáng thanh mảnh do vậy hứa hẹn khả năng lăn và đổi hướng nhẹ nhàng.

Select options

GCT K150 Heavy duty, Red TPU Caster

Available on backorder


150	190	250

198.000 ₫ – 281.000 ₫

Bracket K Series is made of steel up to 5.5 mm thickness, very strong and galvanized (Zinc) to increase rust resistance for the bracket. PP-reinforced TPU tires, so moving will not make as much noise as hard PA and PP wheels.

Select options

Globe 125 Threaded stem, Steel core Rubber Caster

In stock


125	170	125

225.000 ₫ – 283.000 ₫

Piles M16. Beautiful and sturdy. In the Threaded stem range, the price of TG Series is considered to be high, only suitable for customers in the middle and high-end range. There is a side break and dual brake option available.

Select options

GLOBE 150 Plate, Hi-class PU Caster

Available on backorder


150	190	150

223.000 ₫ – 306.000 ₫

Smooth swiveling by double bearing in the swivel head. Hi-quality PU that is both cushion and wear resistant. Besides the caster can withstand water, oil, grease and light chemical.

Select options

PT M200 Plate, Steel core Rubber Caster

Available on backorder


200	242	150

228.000 ₫ – 344.000 ₫

Carefully Zinc coating enhances rust and corrosion resistant. Apply the new Steel core Rubber wheel - the caster look quite strong but still elegant. The quality is assured as it is made by number one caster manufacturer of Viet Nam.

Select options

SUPO 125 Plate, Plastic frame Brown TPR Caster

In stock


125	155	120

222.000 ₫ – 379.000 ₫

A rare water resistant caster, ideal for hospital, seafood industry and laboratory. The body frame is made of thick plastic with stainless steel moving parts. The TPR wheel with a precision bearing inside can roll smooth and noiseless.

Select options

PT L130 Plate, Steel core PU caster

In stock


130	179	150

237.000 ₫ – 326.000 ₫

Shiny Nickel coating enhances rust and corrosion resistant. Steel hubs are soldered with the cast-iron core so it is hard for dust, water and silk to intrude the ball bearing and shaft. Thus lessen the needs for maintainance.

Select options

GCT C200 Cast iron core Rubber Caster

Available on backorder


190	225	150

211.000 ₫ – 266.000 ₫

The advantages of the C Series is the sturdiness of the steel bracket: very thick, even on par with Heavy duty standard. The steel bracket is Niken coating so it is very resistant to scratch, rust and corrosion. However, the Solid rubber wheel's load capacity is somewhat held back the strength of the bracket.

Select options

Globe 150 Plate, Steel core Rubber Caster

In stock


150	190	150

236.000 ₫ – 318.000 ₫

Favored by many Japanese and Korean customers. Largely thanks to high quality rubber: tough, elastic, wear-resistant and non marking. Both single and dual lock options are available.

Select options

PT H250 Steel rim Rubber Caster

In stock


205	243	150

233.000 ₫ – 290.000 ₫

Shiny Nickel coating enhances rust and corrosion resistant. Firm and sturdy steel bracket with good rubber wheel - can last for 1 - 3 years even continuously use. Replacement wheels are also always ready.

Select options

GCT N150 Plate, Steel core Rubber Caster

In stock


150	199	125

204.000 ₫ – 281.000 ₫

The N Series is much like a New Series of design and quality. The N Series has Japanese dual brake style. Along with JP dual brake is a very cushion rubber: soft, wear & tear resistant.

Select options

GCT K100 Heavy duty, Steel core Red PU Caster

Available on backorder


100	145	200

202.000 ₫ – 293.000 ₫

The bracket off Gia Cuong Thinh's K Series has 5.5 mm thickness steel and Zinc plate to prevent rust and corrosion. The PU is mold on Steel core is quite sturdy, good wear and tear resistant. Do note that this one has Steel hubs: small but very effective in dealing with dust intrusion.

Select options

PT L150 Plate, Cast iron core Rubber Caster

In stock


150	200	125

231.000 ₫ – 330.000 ₫

The bracket is 2.5mm thickness of pressed steel. Japanese Standard Series style , the caster outlook is very attractive with a very shiny Niken coating. Rubber wheel quality is good and very wear resistant.

Select options

GCT K200 Plate, Cast iron core Rubber Caster

Available on backorder


200	241	175

205.000 ₫ – 308.000 ₫

The K Series casters has all the features of heavy duty type: double ball bearing raceway, Zinc coating, steel bracket thickness is 5.5 mm. So the casters can withstand heavy load and they will serve you for quite a long time.

Select options

GCT G130 Plate, Steel core Red PU Caster

In stock


130	177	125

208.000 ₫ – 299.000 ₫

Double ball race ways reinforced by wear-resistant tempered steel. The steel bracket has a moderate thickness, relatively bright thanks to the Nickel plating. The caster load capacity is suitable for light and medium industries.

Select options

GCT G130 Plate, Steel core Yellow PU Caster

Available on backorder


130	177	125

205.000 ₫ – 297.000 ₫

Double ball race ways reinforced by wear-resistant tempered steel. The steel bracket has a moderate thickness, relatively bright thanks to the Nickel plating. The caster load capacity is suitable for light and medium industries.

Select options

PT H200 Plate, Cast iron core Rubber Caster

In stock


189	223-226	200

251.000 ₫ – 318.000 ₫

The H Series Caster is fitted with 6x2 Cast iron core Rubber wheels. Shiny Nickel plated steel fork, very thick and sturdy. When the wheel is worn out, you can contact us to buy a replacement wheel.

Select options

Globe 150 Threaded stem, Steel core Rubber

In stock


150	195	150

258.000 ₫ – 316.000 ₫

Favored by many Japanese and Korean customers. Largely thanks to high quality rubber: tough, elastic, wear-resistant and non marking. Both single and dual lock options are available.

Select options

GLOBE 150 Heavy duty, Black PU Caster

In stock


150	193	350

241.000 ₫ – 380.000 ₫

Reliable caster for heavy duty needs. 6.0 mm of steel bracket thickness with double ball bearing raceway. Flat PU tread wheel creates less noise when operate.

Select options

GCT G150 Plate, Steel core Yellow PU Caster

Available on backorder


150	198	150

233.000 ₫ – 329.000 ₫

Double ball race ways reinforced by wear-resistant tempered steel. The steel bracket has a moderate thickness, relatively bright thanks to the Nickel plating. The caster load capacity is suitable for light and medium industries.

Select options

GCT G150 Plate, Steel core Red PU Caster

In stock


150	198	150

233.000 ₫ – 329.000 ₫

Double ball race ways reinforced by wear-resistant tempered steel. The steel bracket has a moderate thickness, relatively bright thanks to the Nickel plating. The caster load capacity is suitable for light and medium industries.

Select options

GLOBE 125 PU on Cast iron Caster (Korea Style)

In stock


125	166	300

268.000 ₫ – 398.000 ₫

6.0 mm thickness steel bracket combines with Korean style Cast-iron core PU wheel. This wheel is round so it will move and rotate much easier compare to the normal flat American version. Plastic cover hubs and grease nipple are equipped

Select options

Bánh xe thép Gia Cường K130 PU đỏ cốt gang

Available on backorder


130	165	250

234.000 ₫ – 321.000 ₫

The bracket off Gia Cuong Thinh's K Series has 5.5 mm thickness steel and Zinc plate to prevent rust and corrosion. The PU is mold on Steel core is quite sturdy, good wear and tear resistant. Do note that this one has Steel hubs: small but very effective in dealing with dust intrusion.

Select options

GCT K200 Plate, Red TPU caster

Available on backorder


200	241	300

244.000 ₫ – 327.000 ₫

Bracket K Series is made of steel up to 5.5 mm thickness, very strong and galvanized (Zinc) to increase rust resistance for the bracket. PP-reinforced TPU tires, so moving will not make as much noise as hard PA and PP wheels.

Select options

Bánh xe đẩy tải nặng Globe 150 PU gang

In stock


150	193	350

284.000 ₫ – 412.000 ₫

Heavy duty with good quality PU tread on firm cast-iron core. The caster is made to operate continuously, it also has greases nipples on bracket steel & wheel's cast-iron core. This makes easy maintenance.

Select options

PT L150 Plate, Steel core Green PU Caster

In stock


150	200	200

298.000 ₫ – 400.000 ₫

Shiny Nickel coating enhances rust and corrosion resistant. Steel hubs are soldered with the cast-iron core so it is hard for dust, water and silk to intrude the ball bearing and shaft. Thus lessen the needs for maintainance.

Select options

PT H350 Plate, Steel rim Rubber Caster

In stock


260	297-300	150

279.000 ₫ – 346.000 ₫

The H Series Caster is fitted with 6x2 Cast iron core Rubber wheels. Shiny Nickel plated steel fork, very thick and sturdy. When the wheel is worn out, you can contact us to buy a replacement wheel.

Select options

SUPO 75 Threaded stem, Plastic frame Brown TPR Caster

Available on backorder


75	106	80

297.000 ₫ – 348.000 ₫

Innovation of stainless caster: the design just as normal steel. Parts are all exposed so it is easier to wash and clean to prevent dust, thread and even bacteria staying inside the wheel like other Plastic frame casters.

Select options

GLOBE 150 PU on Cast iron Caster (Korea Style)

In stock


150	193	350

312.000 ₫ – 436.000 ₫

6.0 mm thickness steel bracket combines with Korean style Cast-iron core PU wheel. This wheel is round so it will move and rotate much easier compare to the normal flat American version. Plastic cover hubs and grease nipple are equipped.

Select options

GCT K150 Plate, Steel core PU Caster

Available on backorder


150	190	300

270.000 ₫ – 365.000 ₫

The bracket off Gia Cuong Thinh's K Series has 5.5 mm thickness steel and Zinc plate to prevent rust and corrosion. The PU is mold on Steel core is quite sturdy, good wear and tear resistant. Do note that this one has plastic hubs: very effective in dealing with dust intrusion.

Select options

Bánh xe kéo M130 PU cốt gang

Available on backorder


130	170	150

301.000 ₫ – 404.000 ₫

Carefully Zinc coating enhances rust and corrosion resistant. Apply the new Steel core PU wheel - the caster look quite strong but still elegant. The quality is assured as it is made by number one caster manufacturer of Viet Nam.

Select options

PL 200 Plate, Cast iron core Rubber Caster

In stock


200	255	150

309.000 ₫ – 446.000 ₫

The bracket is 2.5mm thickness of pressed steel. Japanese Standard Series style , the caster outlook is very attractive with a very shiny Niken coating. Rubber wheel quality is good and very wear resistant.

Select options

SUPO 100 Threaded stem, Plastic frame Brown TPR Caster

Available on backorder


100	130	110

310.000 ₫ – 358.000 ₫

Innovation of stainless caster: the design just as normal steel. Parts are all exposed so it is easier to wash and clean to prevent dust, thread and even bacteria staying inside the wheel like other Plastic frame casters.

Select options

GLOBE 200 Heavy duty, Black PU Caster

In stock


200	243	400

286.000 ₫ – 435.000 ₫

Reliable caster for heavy duty needs. 6.0 mm of steel bracket thickness with double ball bearing raceway. Flat PU tread wheel creates less noise when operate.

Select options

GCT N200 Plate, Steel core Rubber Caster

Available on backorder


200	251	150

310.000 ₫ – 445.000 ₫

The N Series is much like a New Series of design and quality. The N Series has Japanese dual brake style. Along with JP dual brake is a very cushion rubber: soft, wear & tear resistant.

Select options

GLOBE 200 Heavy duty, Cast iron PU Caster

In stock


200	243	400

332.000 ₫ – 474.000 ₫

Heavy duty with good quality PU tread on firm cast-iron core. The caster is made to operate continuously, it also has greases nipples on bracket steel & wheel's cast-iron core. This makes easy maintenance.

Select options

PT H8x3 Plate, Cast iron core Rubber Caster

In stock


200	241-244	200

331.000 ₫ – 407.000 ₫

The H Series Caster is fitted with 6x2 Cast iron core Rubber wheels. Shiny Nickel plated steel fork, very thick and sturdy. When the wheel is worn out, you can contact us to buy a replacement wheel.

Select options

Sisiku 130 Plate, Steel core PU Caster

In stock


130	177	180

327.000 ₫

The 2-stage ball bearing is made of heat-treated steel to increase friction and wear resistance. The heat treated swivel neck ensures a secure hold of the bearing balls in harsh situations. Has Z shape dual brake pedal - very light and easy to use.

Select options

SUPO 125 Threaded stem, Plastic frame Brown TPR Caster

Available on backorder


125	155	120

330.000 ₫ – 378.000 ₫

Innovation of stainless caster: the design just as normal steel. Parts are all exposed so it is easier to wash and clean to prevent dust, thread and even bacteria staying inside the wheel like other Plastic frame casters.

Select options

Sisiku 150 Plate, Steel core Rubber Caster

In stock


150	198	200

356.000 ₫ – 446.000 ₫

The 2-stage ball bearing is made of heat-treated steel to increase friction and wear resistance. The heat treated swivel neck ensures a secure hold of the bearing balls in harsh situations. Has Z shape dual brake pedal - very light and easy to use.

Select options

GLOBE 200 Plate, Hi-class PU Caster

Available on backorder


200	240	150

319.000 ₫ – 423.000 ₫

Smooth swiveling by double bearing in the swivel head. Hi-quality PU that is both cushion and wear resistant. Besides the caster can withstand water, oil, grease and light chemical.

Select options

Globe 200 Plate, Steel core Rubber Caster

In stock


200	240	150

331.000 ₫ – 433.000 ₫

Favored by many Japanese and Korean customers. Largely thanks to high quality rubber: tough, elastic, wear-resistant and non marking. Both single and dual lock options are available.

Select options

Bánh xe kéo M150 PU cốt gang

Available on backorder


150	194	200

366.000 ₫ – 493.000 ₫

Là mẫu bánh xe mới của Phong Thạnh. Càng hàn mạ Niken (Ni) để chống rỉ sét tốt hơn do khí hậu nóng ẩm của Việt Nam. Nhờ sử dụng bánh xe PU cốt thép, bánh xe có dáng thanh mảnh do vậy hứa hẹn khả năng lăn và đổi hướng nhẹ nhàng.

Select options

Globe 200 Threaded stem, Steel core Rubber

Available on backorder


200	245	150

356.000 ₫ – 434.000 ₫

Favored by many Japanese and Korean customers. Largely thanks to high quality rubber: tough, elastic, wear-resistant and non marking. Both single and dual lock options are available.

Select options

GLOBE 250-4 Plate, Pneumatic Rubber Caster

In stock


205	258	125

385.000 ₫ – 437.000 ₫

Pneumatic tire absorbs chock on uneven floor by cushion of compressed air. Very recommended for hospital, resort, hospital, labs, outdoor, etc.

Select options

GCT G200 Plate, Steel core Yellow PU

Available on backorder


200	250	200

366.000 ₫ – 483.000 ₫

Double ball race ways reinforced by wear-resistant tempered steel. The steel bracket has a moderate thickness, relatively bright thanks to the Nickel plating. The caster load capacity is suitable for light and medium industries.

Select options

Nagoya 150 Plate, Steel core PU Caster

In stock


150	198	300

411.000 ₫ – 549.000 ₫

Smooth swiveling by twin bearing in the swivel head. Suitable for various kinds of industrial equipment. Green PU is just so beautiful.

Select options

GCT G200 Plate, Steel core Red PU Caster

Available on backorder


200	250	200

365.000 ₫ – 488.000 ₫

Double ball race ways reinforced by wear-resistant tempered steel. The steel bracket has a moderate thickness, relatively bright thanks to the Nickel plating. The caster load capacity is suitable for light and medium industries.

Select options

PT L200 Steel core PU Caster

Available on backorder


200	255	200

407.000 ₫ – 565.000 ₫

Shiny Nickel coating enhances rust and corrosion resistant. Steel hubs are soldered with the cast-iron core so it is hard for dust, water and silk to intrude the ball bearing and shaft. Thus lessen the needs for maintainance.

Select options

GCT K200 Plate, Steel core PU caster

Available on backorder


200	241	350

383.000 ₫ – 477.000 ₫

The bracket off Gia Cuong Thinh's K Series has 5.5 mm thickness steel and Zinc plate to prevent rust and corrosion. The PU is mold on Steel core is quite sturdy, good wear and tear resistant. Do note that this one has Steel hubs: small but very effective in dealing with dust intrusion.

Select options

Globe 100 Extra Heavy Duty, Magenta PU Caster

In stock


100	149	350

458.000 ₫ – 636.000 ₫

CNC-machined precision raceways and precision tapered secondary load bearings combine to make the casters rugged and easy swiveling. With PU tread wheel, the casters will create less noise and help protect your surface.

Select options

Sisiku 130 Plate, Steel core PU Caster

In stock


130	177	250

474.000 ₫

Bánh xe PU cốt thép được chế tạo theo thiết kế hộp gia cường (box style) có khả năng chịu lực rất tốt. Cổ xoay được giập lỗ nên đảm bảo độ chắc chắn. Hạt bi bằng thép cường lực - cứng và chịu mòn đảm bảo không bị rơi trong suốt quá trình sử dụng.

Select options

PT M200 Plate, Steel core PU Caster

Available on backorder


200	242	200

480.000 ₫ – 667.000 ₫

Carefully Zinc coating enhances rust and corrosion resistant. Apply the new Steel core PU wheel - the caster look quite strong but still elegant. The quality is assured as it is made by number one caster manufacturer of Viet Nam.

Select options

GLOBE 125 Plate, Shock absorbing PU Caster

In stock


125	183	300

484.000 ₫ – 637.000 ₫

Very thick plate and fork with the help of good quality bearing make the caster durable. Moreover, the large size shock absorbing single spring keep the wheel roll smooth and quietly on uneven floor. Shiny red PU wheel is attractive.

Select options

Globe 100 Extra Heavy Duty Plate, Cast iron core PU Caster

Available on backorder


100	149	320

515.000 ₫ – 693.000 ₫

Thanks to combinations of tapered bearing in swivel head, the caster moves lightly and turns easily even under a heavy load. PU tread wheel is durable, wear resistant and floor protection.

Select options

SS200 Extra thick bracket, Cast iron core Rubber Caster

In stock


200	250	250

471.000 ₫ – 667.000 ₫

Extra heavy duty type: painted coating & tapered bearing. The steel bracket bears high load and promising smooth operation. However combining with rubber wheel, this strong bracket is just showing 50 - 75% of its ability.

Select options

Globe 125 Extra Heavy Duty, Magenta PU Caster

Available on backorder


125	173	400

521.000 ₫ – 691.000 ₫

CNC-machined precision raceways and precision tapered secondary load bearings combine to make the casters rugged and easy swiveling. With PU tread wheel, the casters will create less noise and help protect your surface.

Select options

Sisiku 150 Plate, Steel core PU Caster

In stock


150	198	300

553.000 ₫

Bánh xe PU cốt thép được chế tạo theo thiết kế hộp gia cường (box style) có khả năng chịu lực rất tốt. Cổ xoay được giập lỗ nên đảm bảo độ chắc chắn. Hạt bi bằng thép cường lực - cứng và chịu mòn đảm bảo không bị rơi trong suốt quá trình sử dụng.

Select options

GLOBE 150 Plate, Shock absorbing PU Caster

In stock


150	195	350

530.000 ₫ – 691.000 ₫

Very thick plate and fork with the help of good quality bearing make the caster durable. Moreover, the large size shock absorbing single spring keep the wheel roll smooth and quietly on uneven floor. Shiny red PU wheel is attractive.

Select options

GLOBE 125 Plate, Shock absorbing Aluminum core Rubber Caster

Available on backorder


125	183	300

521.000 ₫ – 676.000 ₫

The payloads are often subjected to damaging shock forces as the vehicles' running gear comes in contact with surface obstructions. As a result, shock caused by impact becomes a significant limiting factor to overcome.

Select options

Globe 125 Extra Heavy Duty, Cast iron core PU Caster

Available on backorder


125	173	350

571.000 ₫ – 751.000 ₫

Thanks to combinations of tapered bearing in swivel head, the caster moves lightly and turns easily even under a heavy load. PU tread wheel is durable, wear resistant and floor protection.

Select options

GLOBE 150 Plate, Shock absorbing Rubber Caster

Available on backorder


150	198	350

580.000 ₫ – 731.000 ₫

The payloads are often subjected to damaging shock forces as the vehicles' running gear comes in contact with surface obstructions. As a result, shock caused by impact becomes a significant limiting factor to overcome.

Select options

SS250 Extra thick bracket, Cast iron core Rubber Caster

In stock


250	299	300

570.000 ₫ – 782.000 ₫

Extra heavy duty type: painted coating & tapered bearing. The steel bracket bears high load and promising smooth operation. However combining with rubber wheel, this strong bracket is just showing 50 - 75% of its ability.

Select options

Globe 150 Extra Heavy Duty, Magenta PU Caster

In stock


150	199	500

630.000 ₫ – 802.000 ₫

CNC-machined precision raceways and precision tapered secondary load bearings combine to make the casters rugged and easy swiveling. With PU tread wheel, the casters will create less noise and help protect your surface.

Select options

GLOBE 200 Plate, Shock absorbing PU Caster

Available on backorder


200	245	400

663.000 ₫ – 845.000 ₫

Very thick plate and fork with the help of good quality bearing make the caster durable. Moreover, the large size shock absorbing single spring keep the wheel roll smooth and quietly on uneven floor. Shiny red PU wheel is attractive.

Select options

Globe 350-4 Pneumatic Rubber Caster

In stock


250	290	136

505.000 ₫ – 554.000 ₫

Pneumatic tire absorbs chock on uneven floor by cushion of compressed air. Absolutely recommended for hospital, resort, hospital, labs, outdoor, etc. However, price is steep: 2 - 3 times higher than the domestic solid rubber one.

Select options

SS300 Extra thick bracket, Cast iron core Rubber Caster

In stock


300	345	300

777.000 ₫ – 982.000 ₫

Extra heavy duty type: painted coating & tapered bearing. The steel bracket bears high load and promising smooth operation. However combining with rubber wheel, this strong bracket is just showing 50 - 75% of its ability.

Select options

Globe 150 Extra Heavy Duty, Cast iron core PU Caster

Available on backorder


150	199	420

715.000 ₫ – 888.000 ₫

Thanks to combinations of tapered bearing in swivel head, the caster moves lightly and turns easily even under a heavy load. PU tread wheel is durable, wear resistant and floor protection.

Select options

Globe 200 Extra Heavy Duty, Magenta PU Caster

In stock


200	250	600

753.000 ₫ – 913.000 ₫

CNC-machined precision raceways and precision tapered secondary load bearings combine to make the casters rugged and easy swiveling. With PU tread wheel, the casters will create less noise and help protect your surface.

Select options

GLOBE 200 Plate, Shock absorbing Rubber Caster

Available on backorder


200	245	400

763.000 ₫ – 934.000 ₫

The payloads are often subjected to damaging shock forces as the vehicles' running gear comes in contact with surface obstructions. As a result, shock caused by impact becomes a significant limiting factor to overcome.

Select options

GCT GB200 Ultra Heavy duty, Fat cast iron core PU Caster

Available on backorder


200	290	800

733.000 ₫ – 1.054.000 ₫

Fat PU wheel size: Ø200 x 70 mm. Load capacity s 800 kg/ 01 wheel. Thick, sturdy steel bracket.

Select options

Globe 200 Extra Heavy Duty, Cast iron core PU Caster

Available on backorder


200	250	530

840.000 ₫ – 1.000.000 ₫

Thanks to combinations of tapered bearing in swivel head, the caster moves lightly and turns easily even under a heavy load. PU tread wheel is durable, wear resistant and floor protection.

Select options

Globe 250 Extra Heavy Duty, Magenta PU Caster

Available on backorder


250	298	800

1.270.000 ₫ – 1.705.000 ₫

CNC-machined precision raceways and precision tapered secondary load bearings combine to make the casters rugged and easy swiveling. With PU tread wheel, the casters will create less noise and help protect your surface.

Select options

Globe 250 Extra Heavy Duty, Cast iron core PU Caster

Available on backorder


250	298	750

1.374.000 ₫ – 1.797.000 ₫

Thanks to combinations of tapered bearing in swivel head, the caster moves lightly and turns easily even under a heavy load. PU tread wheel is durable, wear resistant and floor protection.

Select options

Bánh xe GLOBE 50 cao su bi, mặt đế

In stock


50	65	25

18.500 ₫ – 32.500 ₫

2023: Sản phẩm mới của GLOBE. Thuộc dòng bánh xe tải nhẹ (khung thép mỏng và tải trọng 25kg/ 1 bánh xe) với một ổ bi chính xác nên bánh xe lăn rất bon. Cổ xoay là cổ bi xoay 2 tầng: đặc trưng của hàng tải nhẹ chất lượng cao. Bề mặt lốp là cao su mềm TPR, đảm bảo bánh xe lăn êm, không ồn và có tuổi thọ cao.

Select options

Globe 300 Extra Heavy Duty, Magenta PU Caster

Available on backorder


300	348	1100

1.562.000 ₫ – 1.975.000 ₫

CNC-machined precision raceways and precision tapered secondary load bearings combine to make the casters rugged and easy swiveling. With PU tread wheel, the casters will create less noise and help protect your surface.

Select options

GCT B200 Ultra Heavy duty, Twin PU wheel Caster

Available on backorder


200	290	1500

1.396.000 ₫ – 2.148.000 ₫

Ultra heavy duty on dual wheel with load up to 1,500 kg/ 01 wheel. The wheel material is PU on reinforced cast iron. The size of each wheel is Ø200 × 50 mm. Currently, Hao Phong provides Swivel and Rigid casters. Warranty 6 months from date of purchase.

Select options

Globe 300 Extra Heavy Duty, Cast iron core PU Caster

Available on backorder


300	348	1000

1.678.000 ₫ – 2.085.000 ₫

Thanks to combinations of tapered bearing in swivel head, the caster moves lightly and turns easily even under a heavy load. PU tread wheel is durable, wear resistant and floor protection.

Select options

HAO PH☯NG

✆ 0988842145

∞ HAO PH☯NG

☆ Casters