Item Code | Description | Max | Min | Differences | Distance to center | Foot mat | Plate size | Hole spacing | Hole dia. | Weight | Load cap. |
---|---|---|---|---|---|---|---|---|---|---|---|
| | | | | | ||||||
mm | mm | mm | mm | mm | mm | mm | mm | kgs | |||
EH-100W | GLOBE Floor lock (4") | 151 | 123 | 28 | Rubber | 114×100 | 84×71 | 20×11 | 1.52 | 250 | |
EH-125W | GLOBE Floor lock (5") | 174 | 145 | 29 | Rubber | 114×100 | 84×71 | 20×11 | 1.60 | 300 | |
EH-150W | GLOBE Floor lock (6") | 199 | 166 | 33 | Rubber | 114×100 | 84×71 | 20×11 | 1.62 | 350 | |
EH-200W | GLOBE Floor lock (8") | 248 | 217 | 31 | Rubber | 114×100 | 84×71 | 20×11 | 1.75 | 400 |
Installation Guide
The floor lock will be fastened to the bottom of the hand truck. It is best to mount with bolts and nuts for easier be changed and disassembled later. Can be welded but you have to carefully calculate the position and long-term usage of the floor lock. Typical installation locations are as follows:
Note: Floor locks are designed to be used on flat floors, not on steep or uneven floor. It is important to choose a floor lock of the right height so that when unlocked, the vehicle cant move normally. To match the lock set to existing equipment, it is recommended to choose a floor lock with a full height when the locked is 1.6 to 6 mm higher than the total height of the caster. For example:
- Total height of the caster is 150mm then you'll choose the floor lock that have MAX height is in range 152 - 156 mm
- Also in the example above, the caster's total height is 150 mm but if MAX height of the floor lock MAX is only 148mm, you can add a thick spacer above the floor lock baseplate or simply place a few black washers. The purpose is to increase the height of the floor lock by another 4 – 8 mm to match with the caster.