☆ Bánh xe đẩy hàng – Bánh Xe đẩy hàng Hà Nội

Feida 75 Plate, Twin wheel Medical Caster

In stock


75	86	50

74.000 ₫

ABS plastic frame is durable against external forces. Also wear and tear, water and detergents. The wheel has a unique locking system that is very beautiful and the operating force is significantly lighter than similar products. Rubber treads are soft, ride smoothly, non-marking and make less noise.

Select options

GCT 75 Plate, Light duty Solid rubber Caster

Available on backorder


75	93	50

24.000 ₫ – 42.000 ₫

Superior than most of small China caster, this one is better both in steel bracket and wheel quality. As you can see GCT Light duty caster is definitely has higher load capacity and last longer. In GCT product range, the plastic casters are prefer over rubber casters.

Select options

China 75 Plate, Affordable Solid Rubber Caster

In stock


75	93	30

27.000 ₫ – 31.000 ₫

Just acceptable quality: steel bracket is thin and average wheel quality. The caster is not too durable as it has only one ball bearing raceway in swivel head so if overload or by foreign force the bearing ball may fall out.

Select options

PT 75 Plate, Solid rubber Caster

In stock


75	97	50

32.000 ₫ – 50.000 ₫

Superior than most of small China caster, nearly archive the same level with Japan ones. Sturdy rubber that is hard to break, hard to wear out by daily use. This is one of the most success product line of Phong Thanh.

Select options

Pacific 75 Plate, TPU Caster

In stock


75	99	40

40.000 ₫

Light duty casters for institutional. The caster is well made & using high quality material. It can bear up to 25 kgs per caster. Designed for using in the living room, kitchen, office. Preffered for carts with are not often move.

Select options

Pacific 75 Modular stem, TPU Caster

Out of stock


75	99	40

40.000 ₫

Light duty casters for institutional. The caster is well made & using high quality material. It can bear up to 25 kgs per caster. Designed for using in the living room, kitchen, office. Preffered for carts with are not often move.

Select options

PT 75 Threaded stem, Solid rubber Caster

In stock


75	100	50

46.000 ₫ – 52.000 ₫

Superior than most of small China caster, nearly archive the same level with Japan ones. Sturdy rubber that is hard to break, hard to wear out by daily use. This is one of the most success product line of Phong Thanh.

Select options

GCT 75 Threaded stem, Solid Rubber Caster

Available on backorder


75	93	50

39.000 ₫ – 45.000 ₫

Superior than most of small China caster, this one is better both in steel bracket and wheel quality. As you can see GCT Light duty caster is definitely has higher load capacity and last longer. In GCT product range, the plastic casters are prefer over rubber casters.

Select options

PL130 Plate, Affordable Rubber Caster

In stock


123	155	75

49.000 ₫ – 79.000 ₫

It is a affordable medium-sized caster of Thuan Duc Phat company. It can be said that the PL wheel is a new breakthrough in quality and price of Vietnamese casters. PL wheels can even compete well with Chinese goods right in the northern market.

Select options

Feida 75 Screw, Twin wheel Caster

In stock


75	86	50

75.000 ₫

ABS plastic frame is durable against external forces. Also wear and tear, water and detergents. The wheel has a unique locking system that is very beautiful and the operating force is significantly lighter than similar products. Rubber treads are soft, ride smoothly, non-marking and make less noise.

Select options

GCT 125 Plate, Ball bearing Solid Rubber Caster

Available on backorder


125	150	80

77.000 ₫ – 118.000 ₫

Affordable Series. The casters are designed for common & light duty usage. Being said as the most popular affordable caster currently. Make sure to follow using instruction can help extend the product life.

Select options

GLOBE 75 Threaded stem, Slim Black PU Caster

Available on backorder


75	104	65

75.000 ₫ – 98.000 ₫

High quality PU material wheels, moderate load 65 - 75 kg / 01 wheel suitable for use in supermarkets.

Select options

3P 130 Plate, Steel core Rubber Caster

Available on backorder


125	163	90

100.000 ₫ – 134.000 ₫

Can be said as Hao Phong's customized casters. We use PH steel bracket with Phong Thanh's rubber wheel as they are both have same load capacity. Thus created a affordable Series with medium duty capable.

Select options

Bánh xe Feida 75 Nylon lùn tải nặng

In stock


75	107	175

109.000 ₫

Dạng bánh xe lùn chuyên dụng cho tải nặng. Khung thép dày 3,0 mm, mặt đế dày tới 5,0 mm. Kiểu càng xoay nặng tới 1,3 kg (nặng hơn 45% so với hàng khung sơn đen tương tự đang bán trên thị trường). Thích hợp nhất để chở giá máy móc nặng. Tại Việt Nam, bánh xe này thường được sử dụng cho các lò nướng tuy nhiên dùng như vậy sẽ làm giảm tuổi thọ sản phẩm.

Select options

China Gurren 75 Low profile PP Caster

In stock


75	102	150

110.000 ₫ – 138.000 ₫

Giant black caster in … low profile form. Not as strong as Japan's special low profile , but it is often used thanks to its reasonable price.

Select options

PT R130 Plate, Steel core Rubber Caster

In stock


130	163	60

105.000 ₫ – 178.000 ₫

Despite the size of the caster (Ø100 - 200mm), R Series is rated as Light duty type - only 60 kgs per caster. Rubber tread is just light cushion but will help reduce noise and surface protection.

Select options

GLOBE 75 Plate, Black Conductive Rubber Caster

In stock


75	107	80

114.000 ₫ – 149.000 ₫

Conductive rubber tread materials offer excellent electrical discharging throughout the tread and across the whole contact surface. The steel bracket is Zinc coating so the whole caster is electrical conductive. The caster will then producing a continuous and safe discharging to ensure the safety of electronic devices.

Select options

GCT 125 Threaded stem, Ball bearing Solid Rubber Caster

Available on backorder


125	150	80

102.000 ₫ – 124.000 ₫

Affordable Series. The casters are designed for common & light duty usage. Being said as the most popular affordable caster currently. Make sure to follow using instruction can help extend the product life.

Select options

SUPO 75 Plate, Low profile Twin wheel PA Caster

In stock


75	99	200

119.000 ₫

Solution to minimize overall height and maximize load capacity. Dual wheel casters also improve stability and swivel more easily than wider-face single wheels. However, this 40mm diameter caster is the most "ugly" one of the Series.

Select options

GCT C130 Plate, Solid Rubber Cater

Available on backorder


130	160	85

118.000 ₫ – 154.000 ₫

The advantages of the C Series is the sturdiness of the steel bracket: very thick, even on par with Heavy duty standard. The steel bracket is Niken coating so it is very resistant to scratch, rust and corrosion. However, the Solid rubber wheel's load capacity is somewhat held back the strength of the bracket.

Select options

PT H130 Steel core Rubber Caster

Available on backorder


125	161	100

133.000 ₫ – 183.000 ₫

Shiny Nickel coating enhances rust and corrosion resistant. Firm and sturdy steel bracket with good rubber wheel - can last for 1 - 3 years even continuously use. Replacement wheels are also always ready.

Select options

GLOBE 75 Threaded stem, Conductive Rubber Caster

In stock


75	109	80

126.000 ₫ – 149.000 ₫

Conductive rubber tread materials offer excellent electrical discharging throughout the tread and across the whole contact surface. The steel bracket is Zinc coating so the whole caster is electrical conductive. The caster will then producing a continuous and safe discharging to ensure the safety of electronic devices.

Select options

GCT G130 Plate, Steel core Rubber Caster

Available on backorder


130	177	100

150.000 ₫ – 240.000 ₫

Double ball race ways reinforced by wear-resistant tempered steel. The steel bracket has a moderate thickness, relatively bright thanks to the Nickel plating. The caster load capacity is suitable for light and medium industries.

Select options

GCT K130 Plate, Cast iron core Rubber Caster

Available on backorder


130	165	125

156.000 ₫ – 253.000 ₫

The K Series casters has all the features of heavy duty type: double ball bearing raceway, Zinc coating, steel bracket thickness is 5.5 mm. So the casters can withstand heavy load and they will serve you for quite a long time.

Select options

BLOBE 75 Plate, Heat resistant Caster

Available on backorder


75	107	90

185.000 ₫ – 230.000 ₫

Great to use continuously in high temperature environment. Normal operation at 200°C, also resistant to water, chemical.

Select options

GLOBE 125 Plate, Conductive Rubber Caster

Available on backorder


125	154	100

195.000 ₫ – 234.000 ₫

Harms of static electricity in production: Films, bottles and jars are adhered to dust, products do not line up. Or cause sparks leading to fire and explosion. The ink is smudged (crow's feet, beard pulling...). The amount of waste increases due to static electricity causing position deviation when machining.

Select options

GLOBE 125 Plate, Hi-class PU Caster

Available on backorder


125	165	125

197.000 ₫ – 272.000 ₫

Smooth swiveling by double bearing in the swivel head. Hi-quality PU that is both cushion and wear resistant. Besides the caster can withstand water, oil, grease and light chemical.

Select options

SUPO 75 Plate, Heat resistant Nylon Caster

In stock


75	106	70

190.000 ₫ – 253.000 ₫

Can be used continuously in High temperature environment - up to 230°C and maximum at 260°C. Aluminum brake system instead of normal plastic brake one for longer life time. The wheel will roll easily thanks to the ball bearings.

Select options

Globe 125 Plate, Steel core Rubber Caster

In stock


125	165	125

206.000 ₫ – 280.000 ₫

Currently only Side brake available. Smooth swiveling by double bearing in the swivel head. Hi-quality rubber that is both cushion and wear resistant.

Select options

GCT N130 Steel core Rubber Caster

In stock


130	178	125

183.000 ₫ – 262.000 ₫

The N Series is much like a New Series of design and quality. The N Series has Japanese dual brake style. Along with JP dual brake is a very cushion rubber: soft, wear & tear resistant.

Select options

SUPO 75 Plate, Low profile Heavy duty PA Caster

In stock


75	105	450

214.000 ₫ – 280.000 ₫

Same design as the Standard 03S Series but shorter and bigger so it can bear load capacity up to 300 kg. Enhanced PA wheel is strong and durable, it can rolls easy thanks to the double ball bearings. Suitable for lifting heavy machine.

Select options

GLOBE 125 Threaded stem, Conductive Rubber Caster

Available on backorder


125	156	100

214.000 ₫ – 234.000 ₫

Harms of static electricity in production: Films, bottles and jars are adhered to dust, products do not line up. Or cause sparks leading to fire and explosion. The ink is smudged (crow's feet, beard pulling...). The amount of waste increases due to static electricity causing position deviation when machining.

Select options

PT L130 Cast iron core Rubber Caster

In stock


130	179	100

206.000 ₫ – 292.000 ₫

The bracket is 2.5mm thickness of pressed steel. Japanese Standard Series style , the caster outlook is very attractive with a very shiny Niken coating. Rubber wheel quality is good and very wear resistant.

Select options

Globe 125 Threaded stem, Steel core Rubber Caster

In stock


125	170	125

225.000 ₫ – 283.000 ₫

Piles M16. Beautiful and sturdy. In the Threaded stem range, the price of TG Series is considered to be high, only suitable for customers in the middle and high-end range. There is a side break and dual brake option available.

Select options

SUPO 125 Plate, Heat resistant Nylon Caster

Available on backorder


125	155	110

226.000 ₫ – 330.000 ₫

Can be used continuously in High temperature environment - up to 230°C and maximum at 260°C. Aluminum brake system instead of normal plastic brake one for longer life time. The wheel will roll easily thanks to the ball bearings.

Select options

Bánh xe chân tăng chỉnh đế nhựa Feida 75, mặt đế

In stock


74	120	750

333.000 ₫

Optimum leveling ease occurs at 50% of 4 casters total capacity.; Patent protected anti-vibration axles, ratcheting mechanisms and hardened steel raceway sleeve.; Cast aluminum body with a powder coat finish in ivory.

Select options

Sisiku 130 Plate, Steel core PU Caster

In stock


130	177	180

327.000 ₫

The 2-stage ball bearing is made of heat-treated steel to increase friction and wear resistance. The heat treated swivel neck ensures a secure hold of the bearing balls in harsh situations. Has Z shape dual brake pedal - very light and easy to use.

Select options

SUPO 75 Low profile Extra heavy duty PA Caster

In stock


75	114	600

333.000 ₫ – 472.000 ₫

Càng thép rất dày, gần gấp đôi so với dòng tải nặng 11J. Lốp PA khổ lớn và dày như bánh xe nâng của xe nâng tay thủy lực. Có đai che bụi gắn chặt với bầu xoay. Tải trọng của bánh xe rất lớn, 1 bộ có thể tải được tới vài tấn hàng.

Select options

GLOBE 125 Plate, Shock absorbing Aluminum core Rubber Caster

Available on backorder


125	183	300

521.000 ₫ – 676.000 ₫

The payloads are often subjected to damaging shock forces as the vehicles' running gear comes in contact with surface obstructions. As a result, shock caused by impact becomes a significant limiting factor to overcome.

Select options

HAO PH☯NG

✆ 0988842145

∞ HAO PH☯NG

☆ Casters